ēno play
4. Route the cable to the amplifier, making sure that the cable passes between the lift system
tubular support structure and the whiteboard, as shown above.
5. Add a cable tie holder 2” (50mm) from the oval cable passage in the lift system that is closest
to the amplifier and capture the cable, ensuring a service loop between the amplifier and the
cable tie:
•
ēno 2610 requires 27” (685mm) audio and power service loop
•
ēno 2810 requires 35” (889mm) audio and power service loop
Note
: Service loops should not be in view of users.
6. Connect the cable to the amplifier.
7. Secure the cable to the whiteboard about 2” (50mm) from the amplifier using a cable tie and
tie holder.
Option: Install whiteboard wall bracket extenders for fixed wall mounts
!
Important Note
: Do not install the wall bracket extenders if the whiteboard mounts to an adjustable
height mobile stand or adjustable height wall mount.
PolyVision
2002480-001 Rev C
27 of 38