ēno play
Prepare the ēno classic whiteboard
Before beginning to install the ēno play components:
1. If installing ēno play on a new ēno classic whiteboard, unpack the whiteboard and wall
brackets.
Or
1. If installing ēno play on an ēno classic whiteboard that is already mounted to a wall or other
mounting solution, unfasten the screws holding the whiteboard to the mounting brackets and
remove the whiteboard.
2. Lean the ēno whiteboard against a wall with the back facing you.
!
Plan power and audio input cable routing
Important Note
: Cable management is important. The cables between the driver packs and the
amplifier
and any other cables routed against the back of the whiteboard
must be secured by
cable ties as described in “Add cable ties and tape”.
PolyVision
2002480-001 Rev C
7 of 38
