ēno play
4. Install a tie wrap through the horizontal holes in the holder and capture both driver pack cables
(and the power supply and permanent audio input cables if appropriate for your installation).
Refer to “Plan power and audio input cable routing”.
center cable tie
5. Ensure that the driver pack cables are taut between the driver pack and the cable tie.
6. If routing power or audio input cables through this cable tie, assure that all cables routed from
the amplifier to this cable tie are the same length, then tighten the tie wrap.
Install a cable tie between the center and bottom of the board
To install a cable tie between the center of the board and the amplifier cable tie:
1. Add a tie wrap to a cable holder and capture both driver pack wires (and the power supply
and permanent audio input cables if appropriate for your installation). Refer to “Plan power and
audio input cable routing”.
20 of 38
2002480-001 Rev C
Installation and Operation Guide