ēno play
Install the driver packs
Important Note
: If your
ēno
classic whiteboard is mounted using some older adjustable
height mobile stands and adjustable height wall mounts, PolyVision provides driver pack
offset kit. If
ēno
play components include the driver pack offset kit, skip to “Install the
driver pack with driver pack offset kit ”.
!
Assure that your adjustable height lift system looks like the one shown below on the left
before installing the driver pack without the offset kit.
Locate and have ready to use:
•
driver packs (x2)
•
alcohol wipes (x2)
•
driver pack mounting template
•
tape
To install the driver packs:
1. Slide the driver pack mounting template to the upper left corner of whiteboard and tape it in
place.
Note
: The template has a front and back side. Be sure to use the template front in the upper
left corner.
Offset kit not required
Offset kit required
10 of 38
2002480-001 Rev C
Installation and Operation Guide
