1-3
1 Safety Information
1.3
General Safety Information
1.3.1
Operating the Instrument Safely
Faultless and safe operation of the instruments presume proper transport and
proper storage, installation and assembly as well as careful operation of the
instruments. In addition, it is imperative for the safe operation of the devices
that you pay attention to the safety and warning notices which are listed in
these operating instructions. When assembling, installing and operating the
instrument, make sure that you adhere to the safety and accident prevention
regulations applicable to the respective application.
1.3.2
Intended Use
The instrument is intended for use in a laboratory and for operation in an
industrial environment. It may only be operated within the limits set in the
specifications. It is not necessary to tamper with the instrument to use it as
intended as this will invalidate the warranty.
Any use other than the one described in these operating instructions is not
permitted. Polytec rejects any liability for damages which occur from improper
use.
The instruments are designed in accordance with good engineering practice
to meet state-of-the-art safety requirements, have been tested, and left the
factory in a condition in which they are safe to operate.
1.3.3
User Qualification
Task
Qualification
Assembly, cabling, adjustment,
operation
This instrument may be used only by qualified personnel
who are familiar with electrical measuring instruments and
have been trained to use the instrument.
Repair and maintenance
This instrument may only be serviced or repaired by the
manufacturer or its authorized personnel.
Exchange/installation of
subassemblies
Subassemblies may only be exchanged or installed by
authorized service personnel from Polytec.
