Polyprint S.A.
Polyprint S.A
– Texjet plus operation manual English V1.9
- 32 -
5.
Move again the release knob to the same direction as the arrow indicates, so that the
wiper moves in the out position. From this position it is very easy to clean both sides of
the wiper using cleaning solution liquid and a swab. It is more convenient to open the top
cover and pass your hand from the top side:
You have to make sure that the rubber parts of both the wiper and the cap station are always
clean and free from any ink, dried ink, dust or dirt. These two parts are the only ones that come
in contact with the print head itself.
6.
After having finished the cleanings, fill the capping station with cleaning liquid. This will
ensure that the Printhead will remain wet over long period.
