manualshive.com logo in svg

Polycom SoundPoint IP 200W, Руководство по настройке и конфигурации, Страница: 38 / 64

Поделиться
Скачать
Polycom SoundPoint IP 200W Скачать руководство пользователя страница 38

Provisioning and Configuration Guide SoundPoint IP 

4 - 6

Power and Startup

Symptom

Problem

Corrective Action

The handset does not charge.

The SoundPoint IP 200W phone 
has no power.

Verify the charger is powered:

•

Check that the power cord is 
connected properly to the charger, 
and that power is turned on.

Verify batteries are inserted correctly:

•

Check that the batteries are inserted 
with the plus and minus ends facing 
the correct way.

The handset registration failed.

The handset is out of range of 
the gateway.

Handset registrations should not take 
longer than 60 seconds.

Verify handset is in range of the gateway:

•

Ensure that the gateway AC_CODE 
matches the Phones AC_CODE.  By 
default, this is set to 0000.

•

Move the handset closer to the 
gateway, place it in the charger, and 
reset the gateway.

•

Reset Handset using the Service 
menu.
Press the 

OK

 key, then select 

System

. Press the following keys on 

the dialpad: 4, 2, 6, 8, and 5.Select 

Handset > Defaults

 to reset the 

handset to factory defaults. This will 
clear the handset MMI and will allow 
the handset to re-register to the 
gateway in registration mode.

The gateway power indicator is 
not lit.

The SoundPoint IP 200W phone 
has no power.

Verify the gateway is powered:

•

Check that the gateway power cord is 
connected properly, and that the 
adapter is plugged into a power outlet.

Содержание SoundPoint IP 200W

































































Отзывы:

Нет отзывов