Polycom SoundPoint IP 200W, Руководство по настройке и конфигурации

Страница: 22 / 64

Provisioning and Configuration Guide SoundPoint IP 200W
3 - 10
f
Press the End Call key again.
Method 2: Configuring Call Groups and Default Line using the
Configuration File
a
Record each handset IPEI (International Portable Equipment Identity)
by pressing the Ok key, then selecting Settings > Handset ID .
IPEI: 023140051241
This handset ID will be used to specify which handsets can connect to
the gateway.
b
In the configuration file, enable the IPEI matching.
%DECT_SUBS_MATCH_IPEI%:1
This enables the specific handset identified with the IPEI to connect to
the gateway.
c
In the configuration file, define the Handset ID to a specific
DECT_SUB_x
%DECT_SUBS_1%:"023140051241"
d
Specify the call group for each handset.
%CALL_GROUPS1%:"1"
e
Set the default line type to VOIP for the handset.
%USER_PRIMARY_LINE_PP1%:1
f
Set the default outgoing VOIP line.
%USER_VOIP_LINE_PP1%:1
g
Reset the gateway for changes to take effect.
Setting Handset and Gateway Security
You can set a shared four digit access code to secure handset registration to
your gateway. This is also useful if you are setting up multiple gateways and
want to avoid having handsets incorrectly register to a nearby gateway.
Note If you want VoIP line 1, 2, and 5 and the PSTN line to ring on phone 1, you would
set: %CALL_GROUPS1%:"0,1,2,5" . For more information, refer to
Configuration
File on page A-1 .