Polycom RealPresence Capture Station Pro, Руководство администратора

Страница: 61 / 103

Polycom
®
RealPresence
® Capture Station Pro Administrator’s Guide 6.6
Polycom, Inc. 61
5
In the Stream Link Details section
’s
Encoder Address field, enter the IP address of the
RealPresence Encoder Control.
6
To configure a single publish point, select Single .
To configure up to four high-bandwidth streaming video publish points, select Multiple Publish
Points . Then configure each streaming publish point separately by clicking it in the tree under High
Stream .
7
Click the Configure button to configure input, output, and audio settings for the selected publish
point. You will see three tabs:

Input tab Set the audio and video source devices, as shown next.

Output tab Select the Enable check box for the type of content streaming you want to
configure: Broadcast (Pull) or Server (Push) .

Broadcast, or pull, streaming requires a streaming host to contact the RealPresence
Encoder Control and request the stream. If the connection is lost during streaming, an
automatic attempt to regain the connection is not made and you must restart the connection
with a new request from the steaming server.

Server, or push, streaming assumes that a streaming server is listening at the appointed
address. Streaming starts when the encoder sends the encoded video. If the connection is
lost during the stream, the system will automatically try to reconnect.