Polycom RealPresence Capture Station Pro, Руководство администратора

Страница: 29 / 103

Polycom, Inc. 29
Configure General Settings
After you have connected your RealPresence Capture Station Pro appliance and launched the
application, configure the video and audio input and output settings, image quality settings, and capture
parameters in the Advanced Settings dialog. These settings are located in the General menu, including
pages for People Capture, Content Capture, Project Options, and Interface Options.
To get to the General menu:
1
From the RealPresence Capture Station start screen, choose Edit > Advanced Settings . The
Advanced Settings dialog opens displaying the People Capture page.
Configure General Settings in the Advanced Settings dialog.
2
Click the desired page in the menu tree on the left side of the dialog.
The pages in the General menu enable you to set up your video and audio, and configure your
presentation.
●
People Capture Start with the People Capture page to select the video input device (the
RealPresence Capture Station Pro’s capture card is selected by default), configure the aspect ratio
to Auto-Detect, Standard, or Widescreen, configure advanced video and audio input properties,
enable an EagleEye III camera, and enable and edit video thumbnail generation.
●
Content Capture Select the capture card for capturing presentation slides on the Content
Capture page. You can set how the slides are captured by configuring the capture interval, whether
or not to capture a new slide when a content change is detected, and the sensitivity of the capture
to content changes.
●
Project Options On the Project Options page, configure the publishing options, including the
publish folder, pre-publish options for the presentation, and project saving options.
●
Interface Options Set up how your presentation will look on the Interface Options page. Choose
a skin from the three standard options (Media Manager Player, PM3, and SL3.5) or select a skin
you have already configured. You can also set chaptering and break options on the Interface
Options page.