Parameter Reference Guide
Polycom, Inc.
92
UseForPagingOnly
Enables the device to be used for paging
only when the Phone port is connected to
an external PA system (via a RJ11 to line
out connector, available from many
electronics shops). In such configuration
the Phone port is expected to be
“off-hook” all the time. The device
automatically answers an incoming call
and won’t accept call-waiting.
No
TransferWhenHolding
This option provides a short cut to transfer
a call to a fixed preconfigured number
without dialing it. If a valid number is
specified for this parameter, the device
transfers the call to the given number
when the phone hook flashes and then
on-hook (which normally leaves the call
holding if this parameter is not specified).
The valid number should be a complete
number with trunk information, such as
SP1(14083334567)
.
EndHoldingCallWhenHangUp
If enabled, when a user hangs up while a
call is still on hold, the device ends that
call instead of alerting the same to the
user (with a short ring).
No
MOHServiceNumber
The number to call to get music streamed
to the remote party when the remote party
is placed on hold.
PlaySITOnCallFailureCodes
A list of (3-digit) error response codes on
outbound calls to trigger SIT w/ optional
announcement of the error. The device
plays fast busy tone without any
announcement for all other call failure
codes. The codes must be specified
collectively as a digit map.
([4-9]xx)
PlaySITWithAnnoucement
Enables including announcement of the
error when an outbound call has failed.
Yes
Timers
Phone Port Parameter Guide
Parameter
Description
Default Setting
