Parameter Reference Guide
Polycom, Inc.
60
DnsLookupType
Controls what type of DNS record to lookup. Choose from:
•
A Record Only
•
SRV Record Only
•
Try Both
A Record
Only
DnsSrvPrefix
Controls whether to add a standard prefix to the domain name
when looking up an SRV Record. For HTTP and HTTPS, the prefix
to add is
_http._tcp.
. For TFTP, the prefix to add is
_tfto._udp.
. Choose from:
•
No Prefix
•
With Prefix
•
Try Both
No Prefix
GPRM0 to GPRM7
Non-volatile generic parameters that can be referenced in other
parameters, such as
ConfigURL
.
TPRM0 to TPRM3
Temporary variables used in scripts for
ConfigURL
. Please refer to
the
Polycom
®
OBi ATA Device Deployment Guide
for examples on
how to create these variables.
User-Defined Macro 0–3 ($UDM0 – $UDM3)
Value
The value can be any plain text or a valid canonical parameter
name preceded by a
$
sign. For example:
$X_DeviceManagement.
WebServer.Port
You must not enclose the parameter name following the
$
sign with
braces or parentheses.
ExpandIn
This is a comma-separated list of canonical parameter names,
where the macro expansion can be used. As many as three
parameter names can be specified. Specify
ANY
to allow the macro
to expand in any parameter.
Example:
X_DeviceManagement.HTTPClient.UserAgent
There is no
$
sign in front of the parameter name. The macro can’t
be used in any parameter value if this value is set to blank (the
default)
SyntaxCheckResult
This is read only status value regarding the syntax of the UDM.
Pass
means that this UDM is valid. Otherwise, it shows the syntax
error detected by the device either in the
Value
or
ExpandIn
parameters of the UDM.
Auto Provisioning Parameter Guide
Parameter
Description
Default Setting
