Polycom, Inc.
33
Service Providers
This section of the configuration concerns all SIP based configurations. Each ITSP configuration is grouped
together as an ITSP profile. The HDA50 refers to them as ITSP Profile A, B, C, and D. On the other hand,
the SP service account specifics are grouped under the heading SPn service, where n = 1, 2, 3, or 4.
ITSP Profile
Includes parameters
ProxyServer
,
Outbound Proxy
, and
DigitMap
, but does not include account specific
parameters.
SP Service
Includes account specific parameters such as
AuthUserName
,
AuthPassword
,
CallerIDName
, and
X_ServProfile
. The
X_ServProfile
parameter serves to match and determine which ITSP Profile
parameters to use.
Voice Services
●
SP1-6
●
OBiTALK
●
AA
●
Gateways and Trunk Groups
SIP Service Provider Features
The following section describes the SIP Service Provider features of the device. As many as four SIP
accounts or SIP Trunks can be configured on the device. For the purpose of this document and elsewhere
on the device web page, and documentation, and the OBiTALK portal, the term ITSP describes the entity
providing the SIP Trunk service to the device. When the device is used in conjunction with an IP PBX, the
IP PBX takes the place of the ITSP if it is the entity providing the SIP Trunk account credential and
connectivity to the device.
Each ITSP configuration is grouped together as an ITSP Profile, referred to as ITSP Profiles A, B, C, and
D. On the other hand, the SP service account specifics are grouped under the heading SP
n
Service, where
n
= 1, 2, 3, or 4. An ITSP Profile includes such parameters as
ProxyServer
,
OutboundProxy
, and
DigitMap
, but does not include account specific parameters. An SP Service includes account specific
parameters such as
AuthUserName
(usually the phone number of the account),
AuthPassword
,
CallerIDName
, and
X_ServProfile
(which ITSP Profile to assume). If the SP Services use the same ITSP,
then only one ITSP Profile needs to be configured with all SP Services referred to the same profile.
From the device point of view, the SP
n
Service using ITSP Profile
X
is enabled with the following minimal
settings:
●
ITSP Profile X – SIP
::ProxyServer
=
Not Blank
●
SPn Service
::Enabled
= Yes