Parameter Reference Guide
Polycom, Inc.
72
X_CustomKeepAliveMsg
Defines the custom message to be used when
X_KeepAliveMsgType
is “custom”. The value should have
the following format:
mtd=NOTIFY;event=
<whatever>
;user=
<anyone>
where
•
NOTIFY
can be replaced by any other SIP method, such
as
PING
,
•
event
parameter is optional and is only applicable if
method is
NOTIFY
. If event is not specified, the 'keep-
alive' event is used with
NOTIFY
•
user
parameter is optional. If not specified, the
request-uri won’t have a userid, and the TO header field
uses the same userid as the FROM header (which is the
local account userid). If user is specified, it is used as the
userid in the Request-URI and TO header.
SIP messages for keep-alive are sent only once without
retransmission. The device ignores responses to the SIP
messages.
X_UserAgentPort
UDP port where the device sends and listens for SIP
messages.
5060
DirectoryNumber
Directory number associated with this service.
X_DefaultRing
Default ring pattern number to ring the Phone port for
incoming calls on this trunk that are routed to the Phone port
according to the
InboundCallRoute
of this service. The ring
pattern is taken from the selected Ring Profile. Choose from
1 through 10.
1
X_CallOnHoldRing
Pattern to ring Phone port when holding a call on this trunk
that has been connected to the Phone port. Typically this is
a very short distinctive ring pattern that serves as a reminder
to the user that a call is being on hold. The ring pattern is
taken from the selected Ring Profile. Choose from
No Ring
,
or
1
through
10
.
8
X_RepeatDialRing
The ring pattern number to use to ring the Phone port when
a repeat dial operation on this trunk is successful as the
called party is either ringing or answered.
5
X_BargeInRing
Call Waiting Ring pattern to ring the Phone port when the
incoming call is requesting to barge-in. This is applicable in
a call-waiting scenario on the Phone port.
4
X_CallParkedRing
Ring pattern to ring the Phone port only as a reminder that
there are calls parked in the parking lot. This feature is
applicable only in an OBiPLUS solution.
10
SP
n
Services Parameter Guide
Parameter
Description
Default Setting
