Polycom HDA50 страница 26 Скачать руководство пользователя

Страница: 26 / 109

Device Settings

Polycom, Inc.

Prompt Tone

PROMPT, "480-16;10"

Prompt tone is generated from a single frequency component:

480 Hz at

–

16 dBm. The expiration time is exactly 10 seconds. It has only one cadence segment, which has

tone infinite active time.

SIT Tone

SIT_1, "985-16,1428-16,1777-16;20;(1/.380+0,2/.380+0,4/.380+0,0/0+4)"

Special information tone (SIT) is generated from a set of frequency components:

●

First frequency: 985 Hz at

–

16 dBm

●

Second frequency: 1428 Hz at

–

16 dBm

●

Third frequency: 1777 Hz at

–

16 dBm

The expiration time is exactly 20 seconds. It has only one cadence segment, which includes 4 on-off
sections. The segment has infinite repeating time:

●

The first on-off section: generated by the first frequency component, and it has 0.38 tone second

active time and 0 inactive time.

●

The second on-off section: generated by the second frequency component, and it has 0.38 tone

second active time and 0 inactive time.

●

The third on-off section: generated by the third frequency component, and it has 0.38 tone second

active time and 0 inactive time.

●

The fourth on-off section: only generate silence since no frequency component is specified. It has

tone 0 second active time and 4 seconds inactive time.

Stutter Tone

STUTTER, "350-18,440-18;20;.2(.1+.1);()"

Stutter dial tone is generated from a mixture of two frequency components:

350 Hz at

–

18 dBm and 440 Hz at

–

18 dBm. The expiration time for the entire tone is exactly 20 seconds. It

has two cadence segments.

●

The first segment includes only one on-off sections, on 0.1 second and off 0.1 second, and on-off

repeats for 2 seconds.

●

The second segment includes one on-off section, and has infinite repeating time and infinite tone

active time, and plays until the entire tone duration has elapsed.

For more information on Tone Profile A & B parameters, see the

Tone Profile A & B Parameter Guide

table

in the

Parameter Reference Guide

section.

Ring Profile A & B

The HDA50 provides two ring profiles that control associated call tones. You can customize each profile
separately.

Содержание HDA50














































































































Результаты поиска

Содержание HDA50

Отзывы:

Похожие инструкции для HDA50

Бренды по названию

Популярные бренды

Polycom HDA50, Руководство администратора

Результаты поиска

Содержание HDA50

Отзывы:

Похожие инструкции для HDA50

Бренды по названию

Популярные бренды