Parameter Reference Guide
Polycom, Inc.
80
AuthPassword2
One of 4 passwords for authenticating direct dialing callers.
AuthUserID3
One of 4 user IDs for authenticating direct dialing callers.
AuthPassword3
One of 4 passwords for authenticating direct dialing callers.
AuthUserID4
One of 4 user IDs for authenticating direct dialing callers.
AuthPassword4
One of 4 passwords for authenticating direct dialing callers.
If
AuthPassword
is specified,
AuthUserID
can be set to blank to let the device use the default
value, which is a special hash of the
AuthPassword
. This is only applicable if the external gateway
is also a device that understands how to generate the default
AuthUserID
using the same hash
function.
Automated Attendant Parameter Guide
IVR
Announcement
Number
Attendant Announcement
What Happens Next
1
Press 1 to continue this call.
Ring the device.
2
Press 2 to make a new call.
If
UsePIN
authentication is enabled and the user enters a
matching PIN, the device attendant immediately prompts the
user to enter a PIN followed by the pound (#) key. If the
entered PIN is not a match, the attendant gives the user two
additional attempts to enter the PIN. If the third attempt does
not match, the attendant announces a thank you message
and disconnects the call.
3
Press 3 to enter a callback
number.
If a valid number is entered, AA says “Thank you” and
“Goodbye”, hangs up, and then calls the number in back 2
seconds. If the given number is invalid, AA plays SIT tone
followed by an error message.
Tips: Caller can dial 00# to have the AA call back his current
number.
Automated Attendant Prompt List
AA Prompt List
System Default
Prompt To Be Played
Welcome
Welcome to OBi Attendant.
Once, at the beginning when the AA starts.
InvalidPin
Invalid PIN.
After user enters an invalid PIN.
OBiTALK Inbound Direct Dialing Authentication Parameter Guide
Parameter
Description
Default Setting