Parameter Reference Guide
Polycom, Inc.
88
SilenceDetectSensitivity
Phone port silence detection servers the
purpose of driving silence suppression in
RTP transmission when the phone Call
terminates on SP1/2 or OBiTALK Service
and silence suppression is enabled.
This parameter sets a sensitivity level for
the device silence detection algorithm.
Choose from:
•
Low
(harder to detect silence)
•
Medium
(suggested)
•
High
(easier to detect silence)
Medium
Calling Features
CallCommandSignalMethod
Selects the method to signal a command
to the device when the phone is off-hook
with an active call in connected state,
while there is a second call on hold or
ringing. Choose from:
•
N. America
(uses hook switch events
only)
•
Nordic Regions (R1, R2, …)
,
where R = hook flash or the ‘R’ button,
•
R0
: Reject the second incoming call
(applicable only if the second call is
ringing)
•
R1
: End current call, resume/answer
the second call
•
R2
: Hold current call, resume/answer
the second call
•
R3
: Conference the two calls
•
R4
: Transfer second call peer to the
first (not applicable if second call is
ringing)
N. America
CallerIDEnable
Enables Caller ID Signal generation. This
option can be set to Yes even if the
attached phone is not capable of
displaying Caller ID. There is no harm in
sending Caller ID signal while the phone is
in the on hook state.
Yes
Phone Port Parameter Guide
Parameter
Description
Default Setting