Polycom 1725-16829-001 Скачать руководство пользователя

Страница: 124 / 158

User Guide for the Polycom VVX 1500 C Business Media Phone for Cisco Unified Communications Manager (SIP)

118

Polycom, Inc.

Tap

> Settings

Basic

Preferences

Picture Frame

From the Picture Frame screen, specify the folder in which you stored

your images on the USB flash drive, and the length of time you want each

image to display:

—

In the

Folder

field, enter the name of the folder in which you placed

your images on the USB flash drive.
If you didn’t place the pictures in a folder (that is, you placed your

pictures in the root directory), don’t enter a folder name.

—

Tap the

Time Per Image

field, and then enter the number of seconds

you want each picture to display.
You can enter a minimum of 3 seconds and a maximum of 300

seconds. The default is

seconds.

Tap the

Save

soft key.

If the message “No pictures found” displays after you tap the Save

soft key, there are no pictures in the folder you specified, or in the root

directory (if you did not enter a folder name). Go back and make sure the

information you entered is correct.

Tap

to return to the idle screen.

From the idle screen, tap

> Settings

Basic

Preferences

Screen Saver

From the Screen Saver screen, do the following:

—

Tap the

Screen Saver

field’s highlighted box. From the drop-down

list, tap

Enabled

to enable a screen saver.

—

Tap the

Wait Time

field, and then enter the number of minutes the

phone should wait after no activity before displaying the screen saver.
You can enter a minimum of 1 minute and a maximum of 9999

minutes. The default is

minutes.

Tap the

Save

soft key.

Tap

to return to the idle screen.

After the number of minutes you specified in the Wait Time field, your phone

will display the screen saver.
You can stop the screen saver at any time by tapping the touch screen (but the

screen saver will re-start if your phone is idle again).

Содержание 1725-16829-001































































































































































Результаты поиска

Содержание 1725-16829-001

Отзывы:

Похожие инструкции для 1725-16829-001

Бренды по названию

Популярные бренды

Polycom 1725-16829-001, Руководство пользователя

Результаты поиска

Содержание 1725-16829-001

Отзывы:

Похожие инструкции для 1725-16829-001

Бренды по названию

Популярные бренды