Polon-Alfa Ignis 1000, Эксплуатационная и техническая документация

Страница: 7 / 45

ID-E299-001GB 7
Table 2.2
Item Description Remarks
1
2
3
4
5
12 V/17 Ah battery
ML-3 module
Conventional fire detectors of 30 and 40 model
range, including intrinsically safe execution
Manual call points
WZ-31 additional indicator two pcs required for control panel
to extend panel capacity by 8 lines
according to Appendix A
according to Appendix A
2 TECHNICAL SPECIFICATIONS
Overall dimensions L x H x G 392 x 482 x 190 mm
Mass (without batteries) < 11 kg
Ingress protection IP 30
Operation temperature range -5 °C ÷ +40 °C
Allowable operation relative humidity 95 % at +40 °C
Transportation temperature range -25 °C ÷ +55 °C
Power supply voltage:
−
− −
−
50 Hz mains 230 V + 10 % - 15 %
−
− −
−
reserve battery: internal or outside 2 x 12 V/17 Ah, e.g. KOBE HV17-12W
control panel of capacity ≤ 36 Ah
Battery charging current ≥ 1.7 A (without current consumption
by external devices)
Current draw in quiescent mode:
-
from mains < 800 mA
-
from batteries (16/24 detection lines) < 170/228 mA
Current draw in alarm mode:
-
from mains < 800 mA
-
from 17 Ah battery, max. < 600 mA
External devices power supply voltage 24 V + 25 % - 15 %
Admissible current draw from external devices
power supply output, max.
800 mA
Number of detection lines:
-
Standard 16
-
with ML-3 module application 24
Detection line resistance, max. 2 x 120 Ω
Detection line insulation resistance, min. 100 kΩ
Number of detectors installed in a detection line ≤ 32
Number of manual call points in a detection line ≤ 10
Number of all detectors and manual call points ≤ 512
Number of beam smoke detectors (DOP) in a line 1 (without end-of-line resistor)
End-of-line resistor in a detection line 5.6 kΩ, ±5 % 0.25 W
Detection line quiescent current, max. 7 mA
Allowable quiescent current of detectors in detection line 2 mA
Number of monitoring lines
2 or 3
Allowable monitoring line resistance, max. 2 x 120 Ω
Monitoring line insulation resistance, min. 100 kΩ
Monitoring line end-of-line resistor 10 kΩ, ±5 %
Number of external signalling device lines 2 or 3