Polon-Alfa Ignis 1000, Эксплуатационная и техническая документация

Страница: 12 / 45

12 ID-E299-001GB
BZ1 – 3.15 A battery cluster circuit protection; the T3,15L250V type melt fuse;
BZ3 – 1 A external device power supply circuit protection; the F1L250V type melt fuse;
BZ2
– 1 A the control panel reserve internal circuits power supply output; (unused in the current
version);
MAINS SWITCH - a two-pole mains power supply on/off switch.
5 CONTROL PANEL FUNCTIONALITY
5.1 LCD INDICATIONS AT 1
ST
AND 2
ND
ACCESS LEVEL SERVICING
The IGNIS 1240 control panel is equipped with a 16-character alphanumeric liquid crystal display
(LCD). Its main function is to set and display the exact time and date, as well as the control panel
configuration parameters. The current time and date are used by the automatic event recording
system. Additionally, the LCD supports the panel operating personnel displaying information
concerning the control panel status or the functions of activated push buttons.
During the control panel quiescent mode, the LCD displays the date and time. All other information,
except the alarm mode, is displayed momentarily. After some seconds the control panel
automatically switches to the date and time displaying mode.
1. Current date and time
- exemplary display:
(year-month-day hour:min)
2. Control panel alarm mode
The 1
st
and 2
nd
stage alarm
where:
- L1 – number of the line where the first alarm has been detected,
- 0’00 – current fire alarm transmission delay time (0’00…9’59 range).
3. External signalling devices disablement/re-enablement
4. Alarm signal transmission disablement/re-enablement
5. Operation mode switch over between ‘personnel present’ and ‘personnel absent’
02-12-31 23:59
L.1 ALARM ! 0’00
SIGN.DEV. ON SIGN.DEV. OFF
TRANSMISSION ON TRANSMISSION OFF