Polon-Alfa Ignis 1000, Эксплуатационная и техническая документация

Страница: 19 / 45

ID-E299-001GB 19
- with the SELECTION and SET push buttons, choose the proper zone number and variant number
equal to ‘0’
- using the FUNCTION push button, select the function
- with the SELECTION and SET push buttons, set the proper delay time in minutes (0..9) – the X
position in the display and in seconds (00…59) – two following positions XX.
Note:
The delay value set is common for all zones.
- using the FUNCTION push button, select the function
- with the SELECTION and SET push buttons, choose the proper zone number and ‘1’ (on the last
display position) that results in the chosen zone delay disablement.
One-stage alarm with a preliminary reset
Programming:
- using the FUNCTION push button, select the function
- with the SELECTION and SET push buttons, choose the proper zone number (z. 01) and variant
number - ‘1’
- using the FUNCTION push button, select the function
- with the SELECTION and SET push buttons, choose the proper zone number and ‘0’ (on the last
display position) that results in the chosen zone delay disablement.
Two-stage alarm with a preliminary reset
Programming:
- using the FUNCTION push button, select the function
- with the SELECTION and SET push buttons, set the proper zone number and variant number
equal to ‘1’
- with the SELECTION and SET push buttons, set the proper delay time in minutes (0..9) – the X
position in the display and in seconds (00…59) – two following positions XX.
VARIANT z. 01 - 0
DELAY X’ XX’’
DELAYS ON z. 01 - 1
VARIANT z. 01 - 1
DELAYS ON z. 01 - 0
VARIANT z. 01 - 1
DELAY X’ XX’’