16
RESETTING THE MODULE
The PS-5565TW system is equipped with a reset function that allows the installer to erase all transmitter
codes and return all programmed options to factory default.
To reset the module:
NOTE: System flashes PARKING LIGHTS 8 times upon reset.
•
Ensure that the IGNITION is OFF and Valet mode is OFF.
1. Turn the Valet switch in the OFF position.
2. Open the door.
3. Turn the IGNITION switch to the ON position.
4. Raise the HOOD.
5. Press and HOLD brakes.
6. Turn VALET switch ON, OFF, ON, OFF, ON, OFF, ON.
7. PARKING LIGHTS flash 8 times.
8. Close door / hood, released brake then turn Valet switch back to OFF position to exit Valet
mode.
NOTE:
After a reset has been performed, the system sets all options back to default.
(See programming
page for default option.)
VEHICLE STATUS REQUEST
The two-way transmitter has a built in feature that will allow the user to contact the vehicle by remote and
get a report of it’s current condition displayed on the information panel.
To request a status check, press and hold the LOCK & STOP buttons simultaneously.
Condition
Icon
Flashes
Beeps
Engine OFF / Cold
Weather Timer OFF
None
None
2
Engine ON / Cold
Weather Timer OFF
START
2
2
Engine OFF / Cold
Weather Timer ON
SIREN
2
2
Engine ON / Cold
Weather Timer ON
SIREN & START
2
2
Valet Mode
STOP & START
2
2
Armed/Locked
LOCK
1
1
Disarmed/Unlocked
UNLOCK
1
1
