10
TRANSMITTER FUNCTIONS
VALET OPERATION
1. REMOTE STARTER VALET MODE
The system can be placed in Remote Starter Valet Mode. This disables the remote starting capabilities
while maintaining the alarm and door locking/unlocking functions. This is recommended if the vehicle
needs to be serviced.
To ENABLE the Starter Valet Mode, set the VALET switch ON. The remote starter is now disabled.
To DISABLE the Starter Valet Mode, set the VALET switch OFF. The remote starter is now in normal
operation.
2. ALARM VALET MODE
The system can be placed in Alarm Valet Mode. This disables the alarm functions and the starter kill
feature, while maintaining the remote starting capabilities and door locking/unlocking functions. You can
also use the Alarm Valet Mode to stop an alarm condition.
To ENABLE the Alarm Valet Mode, start with Valet switch in the OFF position; turn the IGNITION ON
wait for 2 seconds. Turn the VALET switch from OFF to ON. The LED will turn ON indicating that the
Alarm Valet Mode is enabled. Then, turn the IGNITION OFF.
To DISABLE the Alarm Valet Mode, start with the Valet switch in ON position; turn the IGNITION ON
wait for 2 seconds. Turn the VALET switch from ON to OFF. The LED will turn OFF indicating that the
Alarm Valet Mode is disabled. Then, turn the IGNITION OFF.
NOTE:
Enabling Alarm Valet Mode is required if you want to
stop the initial alarm condition
that
occurs when powering-up the system.
Remote Engine START
UNLOCK (ALARM
DISARM)
LOCK (ALARM ARM)
TRUNK release
(SILENT ARM)
REMOTE
ENGINE
STOP
Cold weather timer ON.
Information Panel will flash command
confirmation with a corresponding
Beep and light flash