Polaris Touring 2004 Скачать руководство пользователя страница 74

Страница: 74 / 144

OPERATION

Daily Storage

At the end of each ride, park the snowmobile

on a level surface and support it at the rear

with an appropriate track stand. The track

should be suspended approximately 4

″

(20 cm) off the ground.
Remove the key and cover the machine.

NOTE:

Polaris has accessory covers

and track stands available to fit all mod-

els. See your dealer for more information.

Towing

For your safety, do not attempt to using the tow hitch until you’ve read

the following warnings and understand the proper hitch functions.

If the snowmobile becomes inoperable and must be towed, and if it

isn’t possible to use a rigid tow bar, attach the tow rope to the ski

spindles (not to the ski loops) to prevent damage to the steering

components. Remove the drive belt before towing, and have a rider on

the towed snowmobile to operate the brake and steering when

necessary.

Objects towed with a rope have no braking power and can easily

collide with the rear of the snowmobile or other objects, resulting

in serious injury or death. DO NOT tow toboggans, sleds,

saucers, or any type of vehicle with a rope. Only a stiff metal

pole connecting the towed object and the tow hitch on the

snowmobile should be used. If passengers are to be towed on a

toboggan or sled, make sure the pole is at least four feet (1.2

meters) long to prevent any possibility of contact between the

snowmobile’s track and a person riding in the towed object.
Braking distances increase when towing loads. Slow down to

maintain control of the snowmobile.

WARNING

Towing a disabled snowmobile with the drive belt in place can

result in serious damage to the engine and drive system. Always

remove the drive belt from a disabled snowmobile before towing.

CAUTION

Содержание Touring 2004

















































































































































Результаты поиска

Содержание Touring 2004

Отзывы:

Похожие инструкции для Touring 2004

Бренды по названию

Популярные бренды

Polaris Touring 2004, Руководство пользователя

Результаты поиска

Содержание Touring 2004

Отзывы:

Похожие инструкции для Touring 2004

Бренды по названию

Популярные бренды