Polaris Touring 2004 Скачать руководство пользователя страница 14

Страница: 14 / 144

SAFETY

Operator Safety

Cargo Overload

Too much weight on the rear of the machine may reduce your ability to

steer. Do not exceed carrier and rack weight limits, and do not allow a

passenger to sit on the seat back or the cargo carrier.

Riding Apparel

Be aware of the weather forecast and

especially the wind chill. A wind chill

table is provided on page 21 for your

reference. To better enjoy your ride, be

prepared, be warm and be comfortable.

Disabled Operators

Safe operation of this rider-active vehicle requires good judgement and

physical skills. Operators with cognitive or physical disabilities have

an increased risk of loss of control, which could result in serious injury

or death.

Control becomes more difficult with two people on board. More

space is required to make turns, and longer distances are needed

for stopping. Make sure the passenger remains seated behind the

driver, facing forward, with both feet placed firmly on the running

boards. Slow down and avoid “jumping” your snowmobile.

WARNING

Loose clothing or long scarves may easily become entangled

in moving parts and cause serious personal injury.
Always wear an approved helmet and eye protection.

WARNING

Содержание Touring 2004

















































































































































Результаты поиска

Содержание Touring 2004

Отзывы:

Похожие инструкции для Touring 2004

Бренды по названию

Популярные бренды

Polaris Touring 2004, Руководство пользователя

Результаты поиска

Содержание Touring 2004

Отзывы:

Похожие инструкции для Touring 2004

Бренды по названию

Популярные бренды