Polaris Touring 2004 Скачать руководство пользователя страница 24

Страница: 24 / 144

SAFETY

Safety Decals and Locations

Warning decals have been placed on the snowmobile for your

protection. Read and follow the instructions of the decals and other

warnings on the snowmobile carefully. If any of the decals depicted in

this manual differ from the decals on your snowmobile, always read

and follow the instructions of the decals

on the snowmobile

If any decal becomes illegible or comes off, contact your Polaris dealer

to purchase a replacement. Replacement

safety

decals are provided by

Polaris at no charge. The part number is printed on the decal.

Clutch Cover Warning

This warning decal is found

under the hood

on the clutch cover:

Do not operate engine with hood open.
Do not attempt adjustment with engine running.
Do not operate engine with this guard open.
Never run engine with drive belt removed.
Never service clutches yourself - see your dealer.

Air Box Warning

This warning decal is found

under the hood

on applicable models:

CAUTION
Do not operate above 40 mph with hood-to-airbox

foam removed or engine failure will result.

Pressure Cap Warning

This warning decal is found on the coolant bottle cover of liquid

cooled models:

WARNING
Do not open hot.
Test or replace when changing coolant.
Press down and turn to release cap.
13 PSI

Содержание Touring 2004

















































































































































Результаты поиска

Содержание Touring 2004

Отзывы:

Похожие инструкции для Touring 2004

Бренды по названию

Популярные бренды

Polaris Touring 2004, Руководство пользователя

Результаты поиска

Содержание Touring 2004

Отзывы:

Похожие инструкции для Touring 2004

Бренды по названию

Популярные бренды