Polaris Touring 2004 Скачать руководство пользователя страница 94

Страница: 94 / 144

MAINTENANCE

General Maintenance

Coolant Mixture

The coolant supplied in the system is a 50/50 mixture of

ethylene-glycol and distilled water. This mixture provides protection

against freezing at temperatures to -34

F (-37

C). If greater

protection is required, the percentage of antifreeze to water may be

increased. Use Premium 60/40 anti-freeze coolant, which is already

premixed and ready to use. Do not dilute with water. Never exceed a

60% antifreeze/40% water mixture. Contact you dealer if greater

protection is required.

NOTE

: Never add tap water to the cooling system. Minerals cause

deposits and may react adversely with the metals in the engine and

cooling system.

Coolant High Temperature Indicator Light

The high temperature indicator light is controlled by a switch in the

engine cooling system on liquid cooled models. If the engine coolant

reaches a certain temperature, the switch completes a circuit that turns

the light on. If you must drive your machine after the high temperature

indicator light has come on, drive slowly and stop frequently to allow

the engine to cool down. See your dealer.

Coolant Level

The coolant level in the coolant bottle must be maintained at the

recommended level shown on the coolant bottle to prevent overheating

and serious engine damage. The level on some models must be

maintained between the minimum and maximum marks. Other models

require the coolant level to be maintained at the “full cold” line when

the engine is cold.

The engine coolant level is controlled by the recovery system. The

recovery system components are:

Coolant bottle or overflow tank

Engine filler neck

Pressure cap (on applicable models)

Connecting hoses

Operating the snowmobile with insufficient coolant will result in

overheating and serious engine damage. Always maintain the

coolant level as recommended.

CAUTION

Содержание Touring 2004

















































































































































Результаты поиска

Содержание Touring 2004

Отзывы:

Похожие инструкции для Touring 2004

Бренды по названию

Популярные бренды

Polaris Touring 2004, Руководство пользователя

Результаты поиска

Содержание Touring 2004

Отзывы:

Похожие инструкции для Touring 2004

Бренды по названию

Популярные бренды