Polaris Touring 2004 Скачать руководство пользователя страница 20

Страница: 20 / 144

SAFETY

Operator Safety

Intake Silencer

Do not operate the engine with the intake silencer or filter removed.

Damage to the engine may occur if the intake silencer or filter are

removed.

Clutches

Do not attempt to service the clutches.

All clutch service must be performed by your dealer. The clutch is a

complex mechanism that rotates at high speeds. Each clutch is

dynamically balanced before installation. Any tampering may disrupt

this precision balancing and create an unstable condition.

Cold Weather Drive-Away

Whenever your snowmobile has been parked for a length of time,

especially overnight, always make sure the skis and track are loosened

from ice and snow before attempting to drive. Apply the throttle with

enough authority to put the machine into motion, but always operate

within safety limits and, on 2-Up machines, with respect for a

passenger. See Starting a Cold Engine on page 56.

Maneuverability

Control and maneuverability comes not only through the steering and

skis, maximum control is achieved by shifting of body weight.

Maneuverability will change for lighter operators or machines designed

to carry a load or a passenger.

Maintenance

Your Polaris snowmobile is a well-engineered and well-constructed

recreational vehicle. Follow the recommended maintenance program

outlined beginning on page 73 of this manual to ensure that all critical

components on the snowmobile are thoroughly inspected by your

dealer at specific mileage intervals.

Содержание Touring 2004

















































































































































Результаты поиска

Содержание Touring 2004

Отзывы:

Похожие инструкции для Touring 2004

Бренды по названию

Популярные бренды

Polaris Touring 2004, Руководство пользователя

Результаты поиска

Содержание Touring 2004

Отзывы:

Похожие инструкции для Touring 2004

Бренды по названию

Популярные бренды