Polaris Touring 2004 Скачать руководство пользователя страница 11

Страница: 11 / 144

SAFETY

Operator Safety

WARNING

Driving a snowmobile requires your full attention. DO NOT

drink alcohol or use drugs or medications before or while

driving. They will reduce your alertness and slow your reaction

time. In most states and provinces, it’s prohibited by law to

drive while intoxicated or under the influence of drugs.
Polaris produces high performance snowmobiles capable of

traveling at high speeds. Extra caution must be observed to

ensure operator safety. Make sure your snowmobile is in

excellent operating condition at all times. We strongly

recommend that the operator check major and vital safety

components before every ride.
All Polaris snowmobiles are designed and tested to provide

safe operation when used as directed. Failure of critical

machine components may result from operation with any

modifications, especially those that increase speed or power.

DO NOT MODIFY YOUR MACHINE. The snowmobile may

become aerodynamically unstable at speeds higher than those

for which it is designed. Loss of control may occur at higher

speeds. Modifications may also create a safety hazard and

lead to bodily injury.

The warranty on your entire machine is terminated

if any

equipment has been added, or any modifications have been

made, to increase the speed or power of the snowmobile.

Содержание Touring 2004

















































































































































Результаты поиска

Содержание Touring 2004

Отзывы:

Похожие инструкции для Touring 2004

Бренды по названию

Популярные бренды

Polaris Touring 2004, Руководство пользователя

Результаты поиска

Содержание Touring 2004

Отзывы:

Похожие инструкции для Touring 2004

Бренды по названию

Популярные бренды