Polaris SUPERSPORT 2006 Скачать руководство пользователя страница 129

Страница: 129 / 300

6.17

ENGINE

22. Move the hose clamp (9) and remove this front radiator

hose from the coolant bottle, and secure it out of the way.

23. Remove the coolant supply hose that is located at the

bottom of the coolant bottle and secure it out of the way.
This will come out with the engine.

24. Remove the rear (10) and left (11) motor mounts located

on the right hand side of the engine.

25. Remove the left hand rear torque stop fasteners (12)

26. Remove the inside motor mount fastener (13), located

under the PTO carburetor boot.

27. Remove the rear torque stop plate.

28. Remove the front left hand torque stop assembly fasteners

(14) and then remove the torque stop assembly.

29. Remove the LH front motor mount nylock nut (15) and

washer.

RH Rear

RH Front

Содержание SUPERSPORT 2006













































































































































































































































































































Результаты поиска

Содержание SUPERSPORT 2006

Отзывы:

Похожие инструкции для SUPERSPORT 2006

Бренды по названию

Популярные бренды

Polaris SUPERSPORT 2006, Руководство пользователя

Результаты поиска

Содержание SUPERSPORT 2006

Отзывы:

Похожие инструкции для SUPERSPORT 2006

Бренды по названию

Популярные бренды