Polaris 340 Edge Скачать руководство пользователя страница 17

Страница: 17 / 157

SAFETY

Operator Safety

Ice and Snow Build-up

Before driving, manually turn the skis to the left and right to be sure ice

and snow are not interfering with full left and right steering. If difficulty

is encountered, remove ice and snow build-up that may be obstructing

the steering linkage.

Driving on Slippery Surfaces

WARNING

Ice and snow build-up may interfere with the steering of your machine, result-

ing in serious injury or death. Keep the underhood area free of snow and ice.

WARNING

Never attempt an abrupt change of direction when operating on slippery sur-

faces. Proceed slowly and use extra caution.
Driving on ice or hard-packed snow reduces steering and braking control,

which may result in loss of control and serious injury or death. Slow down

and use extra caution when operating on slippery surfaces.

Содержание 340 Edge






























































































































































Результаты поиска

Содержание 340 Edge

Отзывы:

Похожие инструкции для 340 Edge

Бренды по названию

Популярные бренды

Polaris 340 Edge, Руководство пользователя

Результаты поиска

Содержание 340 Edge

Отзывы:

Похожие инструкции для 340 Edge

Бренды по названию

Популярные бренды