Polaris 2003 Freedom Скачать руководство пользователя

Страница: 80 / 114

MAINTENANCE AND LUBRICATION

Post Operation Maintenance

Anti-Corrosion Treatment

Spray all the metal components in the engine compartment with a

lubricating type rust inhibitor. We recommend T9 metal protectant.
Apply dielectric grease on battery terminals and connections.

NOTE:

Never leave shop cloths or tools in the engine compartment or

bilge.

General Maintenance

Refer to page 103 for part numbers of Polaris-recommended products.
Replace pop-off valve, spring, and seals every 100 hours only (not

every 6 months).
Replace water separator filter element and o-ring every 100 hours only

(not every 6 months).
Replace inlet and outlet hoses and clamps every 100 hours only.
After washing the engine compartment of the watercraft, protect the

metal components with a T9 Metal Protectant or another

non-flammable

metal protectant. Do not use flammable sprays or

protectants in the engine compartment. Do not use petroleum based

protectants or lubricants in the engine compartment, as most are

flammable and may also deteriorate rubber components.

Periodic Maintenance Schedule

NOTE:

Maintenance intervals are based upon average operating

conditions. Watercraft operated in saltwater require daily corrosion

protection and engine flushing, and more frequent maintenance and

lubrication.
Fogging kits should be added to all Polaris watercraft. The engine

should be fogged if the watercraft will not be used for more than 48

hours.

Maintenance Schedule Key

Perform every 15 hrs. or monthly when operated in salt water.

Perform daily when operated in salt water.

*** Bonded rubber couplers-Pre-Season (annually), 50 hrs., and when

pump is disassembled for maintenance.

Содержание 2003 Freedom



















































































































Результаты поиска

Содержание 2003 Freedom

Отзывы:

Похожие инструкции для 2003 Freedom

Бренды по названию

Популярные бренды

Polaris 2003 Freedom, Инструкция по безопасности и обслуживанию владельца

Результаты поиска

Содержание 2003 Freedom

Отзывы:

Похожие инструкции для 2003 Freedom

Бренды по названию

Популярные бренды