Polaris 2003 Freedom Скачать руководство пользователя

Страница: 25 / 114

SAFETY

Operator Safety

Operator Fatigue and Dehydration

Long hours of boating with exposure to noise, vibration, sun, glare and

wind can result in operator fatigue and dehydration. These conditions

can affect your balance, vision, judgment and reaction time. Fatigue

and dehydration can increase your risk of an accident resulting in

bodily injury or death. Combining alcohol consumption with this

condition greatly increases your risk of causing an accident.
Learn to recognize the early symptoms of fatigue, and allow your body

to recover by taking a break from operating the watercraft. Drink

plenty of non-alcoholic beverages to prevent dehydration, and wear

protective riding gear to protect against exposure to weather elements.

Hypothermia

Your life may depend on a clear understanding of the effects of cold

water on the human body. Many suspected drowning victims actually

died from cold exposure (hypothermia) rather than drowning.
Hypothermia can begin in water as warm as 80

F (27

C). It’s a

condition in which the body loses heat faster than it can produce it.

Violent shivering develops, which may give way to confusion and a

loss of body movement. Hypothermia can result in severe injury or

death in a very short time.

To avoid hypothermia:

Dress warmly

Wear proper gear and stay as dry as possible

Seek a warm environment at the first sign of hypothermia (mild

shivering)

If you fall into the water:

Do not discard clothing

While wearing your life jacket, draw your knees up toward your

chest and hold them there with your arms in the Heat Escape Lessen-

ing Posture (HELP)

Содержание 2003 Freedom



















































































































Результаты поиска

Содержание 2003 Freedom

Отзывы:

Похожие инструкции для 2003 Freedom

Бренды по названию

Популярные бренды

Polaris 2003 Freedom, Инструкция по безопасности и обслуживанию владельца

Результаты поиска

Содержание 2003 Freedom

Отзывы:

Похожие инструкции для 2003 Freedom

Бренды по названию

Популярные бренды