Polaris 2003 Freedom Скачать руководство пользователя

Страница: 90 / 114

MAINTENANCE AND LUBRICATION

Carburetor Adjustment

The carburetor is vital to engine operation and performance.

Adjustment of the carburetor should only be done by an authorized

Polaris dealer. Idle speed can also be adjusted by your dealer.

NOTE:

If the watercraft will be used at a high altitude, above 3000

feet (1000 m), have an authorized Polaris dealer adjust the carburetor to

allow for the thinner atmosphere. Polaris Direct Injected engines

compensate for high altitude automatically.

Steering Cable Inspection

1. The handlebars and steering nozzle should operate smoothly. If

movement is stiff, see your authorized Polaris dealer for service.

2. Turn the handlebars from lock to lock and check to be sure that the

clearances between the steering nozzle and the rear hull are even on

both sides. If the alignment is not even, see your authorized Polaris

dealer for service.

Throttle Cable Inspection

1. Depress and release the throttle

lever. It should return to its

initial position smoothly. If it

doesn’t, see your authorized

Polaris dealer for service.

2. Throttle lever free-play should

not exceed .020

″

-.060

″

(.5-1.5

mm). If it does, see your

authorized Polaris dealer for

service.

Changing the settings on the carburetor could result in poor

performance or engine damage. Do not attempt to change the

carburetor settings.

CAUTION

.020-.060

″

(.5-1.5 mm)

Содержание 2003 Freedom



















































































































Результаты поиска

Содержание 2003 Freedom

Отзывы:

Похожие инструкции для 2003 Freedom

Бренды по названию

Популярные бренды

Polaris 2003 Freedom, Инструкция по безопасности и обслуживанию владельца

Результаты поиска

Содержание 2003 Freedom

Отзывы:

Похожие инструкции для 2003 Freedom

Бренды по названию

Популярные бренды