Polaris 2003 Freedom Скачать руководство пользователя

Страница: 68 / 114

OPERATION

Reverse Operation

Some Polaris watercraft have reverse capabilities. See page 104 to

determine if your watercraft has this feature.

Reverse Lever

1. To activate reverse, pull the reverse

lever (1) all the way up. The lever will

remain in the full up position.

2. Turn the handlebars and apply throttle

carefully as required to maintain

steering control of the watercraft.

3. To return to forward, return the reverse

lever to the forward position.

Polaris Electric Reverse Control (PERC

)

1. To activate reverse, depress the

reverse switch (2) (labeled RVS).

Varying degrees of reverse

engagement are possible, depending

on the duration the reverse button is

depressed.

2. Turn the handlebar and apply throttle

carefully as required to maintain

steering control of the watercraft.

3. To return to forward, depress the forward button (labeled FWD)

until the reverse gate is in the full up position.

NOTE:

The reverse gate can be activated without the engine running

by depressing the bilge button and operating the up/down button for

reverse actuation.

NOTE:

Engine RPM is limited during reverse operation. While in

reverse, the multi-function gauge will flash a warning light and the

corresponding LCD message “REVERSE” will be visible.

Be sure the

reverse gate is in the full forward position before resuming normal

operation or your speed will be limited by the RPM limiter.

Activating reverse while the craft is moving forward could cause

loss of control and result in damage to the watercraft or severe

personal injury to the operator or passenger(s). Do not attempt to

activate reverse while moving forward above planing speed.

WARNING

Содержание 2003 Freedom



















































































































Результаты поиска

Содержание 2003 Freedom

Отзывы:

Похожие инструкции для 2003 Freedom

Бренды по названию

Популярные бренды

Polaris 2003 Freedom, Инструкция по безопасности и обслуживанию владельца

Результаты поиска

Содержание 2003 Freedom

Отзывы:

Похожие инструкции для 2003 Freedom

Бренды по названию

Популярные бренды