Polaris 2003 Freedom Скачать руководство пользователя

Страница: 42 / 114

FEATURES

Multi-Function Instrument (MFI)

DIRECTION:

The lower portion of the analog display contains a

forward/reverse direction indicator. The pointer on the gauge moves in

synchronization with the reverse gate as it is lowered over the jet

nozzle when actuated by the electric thumb switch. The indicator is

useful in establishing a “neutral” position between forward and reverse.

The LED will flash when the reverse gate is not fully forward. Pressing

any key will disable the LED for 5 minutes.

CODE SET MODE:

The factory set default security code is “1234”,

however, the code may be changed to any 4 digit number. To select

your own code, enter CODE SET mode by pressing and continuing to

hold the LOCK button for several seconds until “CHANGE CODE” is

displayed (the display will first show the lock status, followed by

“ENTER CODE _ _ _ _”, and finally “CHANGE CODE”. The MFI

will then display “OLD CODE _ _ _ _”. Enter the code as if locking or

unlocking the vehicle. If the correct code is entered, the display will

then show “NEW CODE _ _ _ _”. Select any 4-digit code. The display

will then read “CONFIRM CODE _ _ _ _”. Enter the same code to

confirm your selection. “CODE CONFIRMED” will display for

several seconds if the second entry of the new code matches the first. If

the second code entered does not match the first, “INVALID CODE”

will be displayed and the CODE SET MODE is cancelled.

DISPLAY:

Pressing the DISPLAY button toggles the MFI between

NORMAL DISPLAY mode and DIGITAL DISPLAY mode. The lower

display will show VOLTS/DISTANCE/HOURS when in NORMAL

mode, and real-time digital RPM and SPEED when in DIGITAL mode.

When first entering DIGITAL DISPLAY mode, the MFI briefly

displays the last recorded peak RPM and SPEED. While the peak

values are being displayed, holding the DISPLAY button for several

seconds will reset the peak values. Pressing the DISPLAY button while

in DIGITAL DISPLAY mode toggles the display back to the standard

VOLT/DISTANCE/HOURS display.

ENGLISH/METRIC:

To change units between English and metric,

press and hold the 1/6 button and the 2/7 button simultaneously for

several seconds. When in metric mode, “km” appears in the distance

meter, and the “MTRS” icon will illuminate in the depth gauge if

activated.

WARNING INDICATIONS:

LOW FUEL - 1/8 tank or less of fuel

remaining; LOW OIL: 1/4 tank or less of oil remaining; ENGINE

OVERHEAT - overheated engine; LOW BATTERY - battery voltage

below 10.9 volts; REVERSE indicates reverse has been initiated;

CHECK ENGINE (DI models) - indicates a warning condition from

the computer engine management system.

Содержание 2003 Freedom



















































































































Результаты поиска

Содержание 2003 Freedom

Отзывы:

Похожие инструкции для 2003 Freedom

Бренды по названию

Популярные бренды

Polaris 2003 Freedom, Инструкция по безопасности и обслуживанию владельца

Результаты поиска

Содержание 2003 Freedom

Отзывы:

Похожие инструкции для 2003 Freedom

Бренды по названию

Популярные бренды