Polaris 2003 Freedom Скачать руководство пользователя

Страница: 110 / 114

108

WARRANTY

Warranty Policy

This warranty does not cover accidental damage, normal wear and tear,

abuse or improper handling. This warranty also does not cover any

personal watercraft that has been altered structurally, modified,

neglected, improperly maintained, used for racing, or used for purposes

other than for which it was manufactured, or for any damages which

occur during trailer transit or as a result of unauthorized service or the

use of unauthorized parts. In addition, this warranty does not cover

physical damage to paint or finish, gel coat stress cracks, tearing or

puncturing of upholstery material, corrosion, or defects in parts,

components or personal watercraft due to fire, explosions or any other

cause beyond Polaris’ control.
This warranty does not cover the use of unauthorized lubricants,

chemicals, or fuels that are not compatible with watercraft. In addition

this warranty does not cover stress cracks, submersion, or growth of

marine organisms on hull and deck.
The exclusive remedy for breach of this warranty shall be, at Polaris’

exclusive option, repair or replacement of any defective materials, or

components or products. THE REMEDIES SET FORTH IN THIS

WARRANTY ARE THE ONLY REMEDIES AVAILABLE TO ANY

PERSON FOR BREACH OF THIS WARRANTY. POLARIS
SHALL HAVE NO LIABILITY TO ANY PERSON FOR

INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES OF

ANY DESCRIPTION, WHETHER ARISING OUT OF EXPRESS OR

IMPLIED WARRANTY OR ANY OTHER CONTRACT,

NEGLIGENCE, OR OTHER TORT OR OTHERWISE. Some states

do not permit the exclusion or limitation of incidental or consequential

damages or implied warranties, so the above limitations or exclusions

may not apply to you if inconsistent with controlling state law.
ALL IMPLIED WARRANTIES (INCLUDING BUT NOT LIMITED

TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE) ARE LIMITED IN

DURATION TO THE ABOVE ONE YEAR WARRANTY PERIOD.

POLARIS FURTHER DISCLAIMS ALL EXPRESS WARRANTIES

NOT STATED IN THIS WARRANTY. Some states do not allow

limitations on how long an implied warranty lasts, so the above

limitation may not apply to you if inconsistent with controlling state

law.

Содержание 2003 Freedom



















































































































Результаты поиска

Содержание 2003 Freedom

Отзывы:

Похожие инструкции для 2003 Freedom

Бренды по названию

Популярные бренды

Polaris 2003 Freedom, Инструкция по безопасности и обслуживанию владельца

Результаты поиска

Содержание 2003 Freedom

Отзывы:

Похожие инструкции для 2003 Freedom

Бренды по названию

Популярные бренды