Polaris 2003 Freedom Скачать руководство пользователя

Страница: 13 / 114

SAFETY

Safety Decals

Collision Decal

The collision decal is located on the dash of your watercraft. The

illustration is provided for shape identification only. The text is found

below.

Collision Decal Text

Collisions result in more INJURIES AND DEATHS than any other

type of accident for personal watercraft (PWC).

To Avoid Collisions:
Scan Constantly

for people, objects and other watercraft. Be alert for

conditions that limit your visibility or block your vision of others.

Operate Defensively

at safe speeds and keep a safe distance away

from people, objects, and other watercraft.

Do not follow directly behind PWCs or other boats.

Do not go near others to spray or splash them with water.

Avoid sharp turns or other maneuvers that make it hard for others to

avoid you or understand where you are going.

Avoid areas with submerged objects or shallow water.

Take Early Action

to avoid collisions. Remember PWCs and

other boats do not have brakes.

Do Not Release Throttle When Trying To Steer

away from objects -

you need throttle to steer. Always check throttle and steering controls

for proper operation before starting PWC.
Follow navigation rules and state and local laws that apply to PWCs.
See Owner’s Manual for more information.

Содержание 2003 Freedom



















































































































Результаты поиска

Содержание 2003 Freedom

Отзывы:

Похожие инструкции для 2003 Freedom

Бренды по названию

Популярные бренды

Polaris 2003 Freedom, Инструкция по безопасности и обслуживанию владельца

Результаты поиска

Содержание 2003 Freedom

Отзывы:

Похожие инструкции для 2003 Freedom

Бренды по названию

Популярные бренды