Polaris 2003 Freedom Скачать руководство пользователя

Страница: 16 / 114

SAFETY

Operator Safety

Any operator of a Polaris watercraft must know and practice the

following guidelines for personal safety and the safety of passengers.

Never permit a guest to operate this watercraft unless the guest has read

and understands all warning decals and the owner’s manual.

Operator Guidelines

This watercraft is not a toy. It’s a high performance powerboat, and

operating it requires learned and practiced skills. All operators and

passengers should become familiar with proper operating techniques

before attempting maneuvers. Always operate the watercraft at a speed

appropriate for water conditions and for your level of experience.
The minimum operator age for this watercraft is 16 years of age, but

operators between 16 and 18 years of age require close adult

supervision. Obey all applicable boating rules and regulations.

This watercraft does not have brakes.

The watercraft is stopped by

releasing the throttle. The vehicle will glide to a stop due to the natural

drag of the water.

Allow a minimum of 300 feet (90 m) to coast to a

stop from full throttle.
Jet thrust is required to steer and turn the vehicle.

Never completely

release the throttle and attempt to turn at more than a trolling speed.

The watercraft will not turn. Practice until you’re comfortable with

turning and stopping, and be sure you’ve mastered the skills before

carrying a passenger.
Learn and observe all local, state, and federal boating regulations and

speed limits. Boating laws and navigational rules are designed for the

safety of everyone sharing the waterways.

WARNING

Failure to follow the warnings and instructions contained throughout

this manual and on your vehicle can result in severe injury or death.
Read and understand your owner’s manual and all warning decals

before operating a Polaris watercraft.

Содержание 2003 Freedom



















































































































Результаты поиска

Содержание 2003 Freedom

Отзывы:

Похожие инструкции для 2003 Freedom

Бренды по названию

Популярные бренды

Polaris 2003 Freedom, Инструкция по безопасности и обслуживанию владельца

Результаты поиска

Содержание 2003 Freedom

Отзывы:

Похожие инструкции для 2003 Freedom

Бренды по названию

Популярные бренды