Z420
Z420
Rigging Manual
1
Unpacking and Preparation
2
Assembling the Mast
3
Stepping the Mast
4
Rigging the Boom
5
Vang
6
Mainsheet
7
Jib
8
Mainsail
9
Cunningham
10
Autobailer and Plugs
11
Rudder and Centerboard
12
Maintenance and Service
13
Examination Report
1. Unpacking and Preparation
Unpack the major parts listed below and lay them out on a soft piece of ground free of sharp objects.
To avoid damaging contents, do not cut into packaging.
a.
Hull
b.
Spar Kit which includes:
Mast
Boom
c.
Boat Kit which includes:
Mainsail
Mainsheet
Jib
Jib Sheet
Spinnaker Spinnaker sheets
Tiller/Hiking Stick Bow line
Top Batten
Rudder Assembly
Tools:
To rig your Z420 for the first time
you will need the following:
Knife
2 adjustable wrenches and/or pliers
Electrical tape
Note:
All lines are as long as necessary for
maximum purchase. LaserPerformance
encourages you to customize line lengths
for your sailing pleasure, but be sure to cut
and burn ends to prevent fraying.
Summary of Contents for Z420
Page 10: ...13 Examination Report ...
