Polar Electro Xtrainer Plus, Руководство пользователя

Страница: 14 / 36

20 21
3. Press SIGNAL/LIGHT to select the desired value.
In case of RECO HR: Select the desired value for the
minutes and press STORE/LAP/RECOVERY to lock your
selection. Then press SIGNAL/LIGHT to select the desired
value for the seconds.
In case of RECO TI: Select the heart rate value you want
to reach.
The digits run faster if you press and hold SIGNAL/LIGHT.
Release the button when the desired value is approaching.
However, if you by accident pass too quickly the digit you
wanted to set, press and hold SET/START/STOP to restart
from default settings.
4. Press STORE/LAP/RECOVERY to lock your selection.
You have the following two alternatives to continue:
1. To start setting the Primary and Secondary Time Display press
SET/START/STOP.
The fourth block of the graphic bar representing the setting
of the
Primary and Secondary Time Display
starts to flash.
CHRONO (alternatively TIME or TIM1) appears in the display.
Number 1, as a sign of the Primary Time Display, starts to
flash.
Continue from Setting the Primary and Secondary
Time Display .
2. To return to Time mode press SELECT twice.
SETTING THE PRIMARY AND
SECONDARY TIME DISPLAY
The Primary Time Display symbol 1 and 00:00 0
(alternatively time of day or the pre-set value of the
timer) is flashing.
1. Press SIGNAL/LIGHT to select the desired
Primary Time Display. The alternative you
choose will be displayed in the middle row
during the Heart rate mode.
CHOOSE FROM THESE ALTERNATIVES:
CHRONO 00:00 0
In the Heart rate mode displays total
exercising time.
TIME Time of day(for example 1:52 PM/13:52 )
In the Heart rate mode displays time of day.
TIM 1 Setting of Timer 1 (for example 0:10 00)
In the Heart rate mode displays the
counting down of the timers after one another
depending on how many timers you have set.
This alternative is available only if you have
earlier set at least Timer 1.
2. Press SET/START/STOP to start setting the
Secondary Time Display.
The Secondary Time Display symbol 2 and
00:00 0 (alternatively time of day or pre-set
value of the timer) start to flash.
3. Press SIGNAL/LIGHT to select the desired
Secondary Time Display. The alternative you choose can be