Polar Electro Xtrainer Plus, Руководство пользователя

Страница: 11 / 36

14 15
SETTING THE HEART RATE
AND CYCLING FEATURES
SETTING THE HEART RATE
AND CYCLING FEATURES
SETTING THE DATE
The day is flashing.
1. Press SIGNAL/
LIGHT
to select the day.
2. Press STORE/ LAP/
RECOVERY to lock
your selection.
The month starts
flashing.
3. Press SIGNAL/LIGHT
to select the month.
4. Press STORE/LAP/RECOVERY to lock your selection.
The year starts flashing.
5. Press SIGNAL/LIGHT to select the desired year.
6. Press STORE/LAP/RECOVERY to lock your selection.
You have the following two alternatives to continue:
1. To enter the alarm setting mode, press SET/START/STOP.
ALM appears in the display.
The alarm symbol starts to flash.
Continue from Setting the alarm .
2. To return to Time mode, press SELECT twice.
To see date in the Time mode, press and hold SIGNAL/
LIGHT. To see total cycling distance, press and hold SIGNAL/
LIGHT again. To return to Time mode press and hold
SIGNAL/LIGHT a third time.
Start here to set:
Heart rate features
- Timers 1, 2 & 3
- Heart Rate Limits 1, 2 & 3
- Recovery function
- Primary / Secondary Time Display
Cycling mode features
- Cadence / Altitude Display
- Altitude
- Wheelsize
- Odometer
In the display each function is represented by a block in the graphic
bar in the above order. A flashing block means that you are setting
the corresponding function.
Starting the Heart rate and Cycling feature settings
1. In the Time mode press SELECT three times.
- SET starts to flash in the upper right corner of the display.
- TIM appears in the display.
- The uppermost block of the graphic bar representing the
setting of Timers 1, 2 & 3 starts to flash.
2. Go through the Heart rate feature settings (Timers, Heart Rate
Limits, Recovery function and Primary/Secondary Time Display)
by following the instructions.
3. To swap to Cycling feature settings, press simultaneously SET/
START/STOP and SIGNAL/LIGHT.
- Bike symbol appears in the display.
OR