![background image](http://html1.mh-extra.com/html/poettinger/top-662/top-662_operators-manual_1570546029.webp)
EN
OperatiOn
1900_EN-Einsatz_2860
- 29 -
4. Now select the rotor with which you wish to work on
the single rotor control unit.
5. Set the tractor control unit to floating position
Continuing work with 2 rotors
1. Pre-select the rotor you wish to lower at the single-
rotor control or pre-select the two rotors at the
single-rotor control.
2. Set the tractor control unit to floating position. This
lowers the rotor again.
lowering a rotor
1. Select the rotor you wish to lower on the single rotor
control unit.
2. Set the tractor control unit to floating position to lower
the pre-selected rotor.
TIP
Set the single rotor control unit lever to centre position to
also lower the second rotor. Because the tractor hydraulic
system is already in float position, the second rotor will
be lowered.
TIP
Adjust the lowering speed of the rotor with the choke on
the lifting cylinder.
Raising the 2nd rotor
1. Select the lowered rotor or both rotors (=centre
position) at the single rotor control unit.
2. Set single-action control unit to “raise”
Control unit Single rotor control unit
Pre-select the rotor to be operated using the control unit
Left - left rotor
Centre - both rotors
Right - right rotor
Two-swath function (optional
equipment)
TIP
The two-swath function cannot be retrofitted!
Overview:
2
1
3
1...bowden cable
2...middle swath curtain
3...shut-off valve for the middle swath curtain