Poettinger TOP 662 Скачать руководство пользователя страница 16

Страница: 16 / 62

- 16 -

1900-DE_Anbau_2860

AttAchiNg thE mAchiNE

Parking the machine

The machine can be parked both in the working position

and in the transport position.

DANGER

Risk of death - in the event of unpredictable

movements of tractor or machine

•

Park the machine only on firm, level ground.

•

Secure the tractor against unintentional

rolling.

•

Turn the engine off.

•

Remove the key.

•

Secure the machine against tipping using

supports (1).

1. Turn off the engine and remove the ignition

key.

2. Fold in the support stand

- Unlock spring-loaded bolts (B)
- Swivel support stand (5a) up and let it engage

3. Uncouple lines and the drivetrain

- Pull the cardan shaft off and place it on the support

(6).

- Uncouple the hydraulic lines and place them in the

hose support (7) (If problems occur, bring the control

unit to floating position)

- Remove the cord (Standard) or the cable and the

control unit (single rotor raising) from the tractor

cabin

- Uncouple electric cable from tractor and place it on

the cable holder (7) (For single rotor operation, two

electric cables need to be uncoupled.)

4. Pulling the emergency brake

NOTE

Risk of material damage due to the crank protruding

from the parking brake

•

Lock the crank of the parking brake in park-

ing position after use!

4. Unhitch unit from tractor.

5. Secure machine with anti-theft device

1. Fit anti-theft device to the coupling
2. Secure anti-theft device with a padlock.

Содержание TOP 662































































Результаты поиска

Содержание TOP 662

Отзывы:

Похожие инструкции для TOP 662

Бренды по названию

Популярные бренды

Poettinger TOP 662, Руководство оператора

Результаты поиска

Содержание TOP 662

Отзывы:

Похожие инструкции для TOP 662

Бренды по названию

Популярные бренды