- 49 -
1800_DE-ANHANGA_SICHERHEIT
Annex -A
EN
TIP
This operating manual contains this symbol at all points
relating to the safety of
persons.
1.) Operating instructions
a. The operating instructions are an important part of the
machine. Make sure that the operating instructions are
always on hand when operating the machine.
b. Keep the operating instructions as long as the machine
is in your possession.
c. Pass the operating instructions on to the buyer when
selling the machine or changing the operator.
d. Make sure that all safety and warning symbols remain
attached on the machine and keep them readable. The
hazard warnings provide important information for a
safe operation and, thus, your safety.
2.) qualified personnel
a. Only persons of legal age who are mentally and
physically able and have been trained or familiarized
accordingly is allowed to operate this machine.
b. Persons not yet trained, familiarized or under training or
in a general education must only operate this machine
under the supervision of an experienced person.
c. Inspection, setting and repair work must only be
performed by authorized persons.
3.) Performing maintenance work
a. These instructions only refer to service, maintenance
and repair operations the user is able to carry out
without assistance. Any work beyond this scope has
to be carried out at authorized workshops only.
b. Repairs on the electrical and hydraulic system, preloaded
springs, pressure accumulators, etc. require sufficient
knowledge, correct tools and protective clothing and,
thus, must only be performed at authorized workshops.
4.) After maintenance work on brakes
a. After each repair of the brakes, a functional check or a
test drive must be carried out to ensure that the brakes
function properly. New drums or brake linings only have
optimum braking effect after a few braking operations.
Violent braking should be avoided.
5.) modification work
a. Do not undertake any unauthorised additions,
modifications or alterations to the machine. This also
applies to the installation and setting of safety devices
as well as welding or drilling in stress-bearing parts.
6.) Appropriate use
a. see technical data
b. Intended use also includes compliance with the
manufacturer's stipulated operating, maintenance and
service conditions.
7.) Spare parts
a. Original parts and accessories are specially designed
for the machines and their equipment.
b. We expressly draw your attention to the fact that genuine
parts and accessories not supplied by us, have not been
tested and approved by us.
c. Under certain circumstances, the installation and/or
use of such products may negatively modify or impair
the specified structural properties of the machine. The
manufacturer accepts no liability for any damage caused
through the use of non-genuine parts and accessories.
d. Unauthorised changes as well as the use of components
or attachments on the machine lead to the exclusion of
manufacturer's liability.
8.) Safety devices
a. All protection devices must remain on the machine and
be maintained in proper condition. Replacement of worn
or damaged covers or guards is required in good time.
9.) Before starting work
a. Before commencing work, the operator must familiarise
with all of the operating devices and functions. The
learning of these is too late after having already
commenced operation!
b. Before every putting into operation check the vehicle
or the implement for traffic and operating safety.
safeTy advice
