PUM_STR_091201_EN
19/30
0
1
5
2
3
4
8.
INSTALLATION
HOSE/GRABBER HANGING PROCEDURE
1.
STR profile:
2.
STR profile height from floor (3-5m / 10-16'):
3.
Hose loop height:
4.
Magnetic Grabber
®
height from the floor:
5.
Hose Saddle:
a) The STR profile´s height from the floor is an important
factor when determining the hose loop height.
b) The hose loop height must not be lower than 2m / 6.5 feet
to prevent it from disturbing the personnel using the staion.
c) The hose saddle shall be positioned approximately on half
the distance between The STR Magnetic Grabber
®
and the
suction trolley.
d) The height (8) of the Grabber
®
nozzle should be 25cm /
10” - 30cm / 12” from finished floor.
ATTENTION
A manual damper can / should be added to tune the
airflow through the STR rail and Grabber®.
WARNING
PRODUCT MAY CONTAIN SHARP EDGES
Use care when servicing unit.
Failure to do so could result in minor personal
injury.
MAN_MAG_STR_TUV_SUD_180517/2_EN
