PUM_STR_091201_EN
18/30
0
2
3
1
4
5
HOSE ALIGNMENT PROCEDURE
1. STR-profile
2. Grabber ®:
3. Saddle
4. ICCA Trolley
5. Balancer:
The hose package (1) should be aligned before the assembly as
follows:
The exhaust hose assembly shall be aligned at
installation as follows:
1. The exhaust hose assembly is straightened out on the
floor with the Magnetic Grabber® pointing upwards
against the door and facing upwards.
2. Reposition if nessecary and align the Magnetic Grabber®
(2) and the hose saddle (3) in the show position.
3. After hose alignment mount the hose (1) on the hose
connection with the Magnetic Grabber® pointing
upwards against the door.
4. Connect the STR hose to the trolley using a hose clamp.
Also install the balancer using the caribiner hook. incuding
the safety cahin and Balancerlocking cable to the trolley.
5. Slide the completed trolley in the rail with the balancer facin
the driving direction / exit door.
8.
MONTAGE
WARNING
PRODUCT MAY CONTAIN SHARP EDGES
Use care when servicing unit.
Failure to do so could result in minor personal
injury.
MAN_MAG_STR_TUV_SUD_180517/2_EN
