PUM_STR_091201_EN
14/30
0
ATTENTION
NOTE! The rubber seal is to be greased with liquid
soap before mounting.
8.
INSTALLATION
3
2
4
1
MOUNTING OF RUBBER SEAL
1.
STR profile
2.
Rubber seal
3.
Tool no. 11600
4.
Tool no. 11601
a) Turn the rail profile with the opening upwards.
b) If the seal must be joined it must be done before
mounting. The rubber seal should overlap and be cut
together with a sharp knife. The rubber seal ends are to be
fixed together with glue: Loctite no. 495 or similar rubber
glue.
c) The rubber seal is mounted with tool no. 11600.
d) The rubber seal is easily mounted with tool no. 11601, the
rail profile hanging in its support legs.
DUCT CONNECTION
1.
STR profile:
2.
Connection socket, Ø200mm / 8":
3.
End socket with duct connection, Ø160mm / 6,25":
a) The rail is connected to the fan and the duct system by the
connection socket (2) or the end connection socket (3).
b) The connection socket is mounted by cutting a hole 500 x
60mm / 20 x 2,4" in the rail profile´s side.
c) The connection socket is mounted with a rivet or self drilled
screws and sealed with elastic compound.
d) The end socket with duct connection, Ø160mm / 6,25", is
mounted according to "Mounting instruction; End sockets".
3
500mm/19,6”
60 mm/2,3”
1
2
WARNING
PRODUCT MAY CONTAIN SHARP EDGES
Use care when servicing unit.
Failure to do so could result in minor personal
injury.
MAN_MAG_STR_TUV_SUD_180517/2_EN
