Pluscom SPG-11, Руководство пользователя

Страница: 31 / 58

Pluscom Skype/PSTN Gateway
SPG-11 User Manual
Copyright © 2006 Pluscom Technologies Limited
28
5.2.1 Making and Receiving Calls
You can continue to use the telephone handset connected to the Skype VoIP Gateway to make
and receive standard telephone calls as you used without any change. To make a standard phone
call, just pick up the handset and dial as you normally would. To answer (receive) a standard
phone call just pick up the handset when the phone rings.
When you receive an incoming Skype™ call, the handset connected to the Skype VoIP Gateway
will ring. If you handset supports Caller ID, then the Skype username will be
displayed on the handset’s screen where the standard caller ID information is displayed.
To answer the call, just pick up the handset and speak as you normally would. To end the
call, simply hang up the handset as you normally would.
If you have SkypeOut™, you can use the Skype VoIP Gateway connected handset to make
SkypeOut™ calls by picking up the handset, pressing ##, to indicate to the Skype VoIP Gateway
that this is not a standard call but a Skype call, dialing as per the SkypeOut™
recommended dialing sequence, 00 + country code + telephone number (e.g. 001 617
555 1212) and pressing the asterisk (*) key.
In order to make a call to a Skype™ contact, you will need to use the Skype™ program
to assign a speed dial (as described in the next section) to each person you would like to
call from the Skype VoIP Gateway connected handset. Then simply pick up the handset, press ##,
to indicate to the Skype VoIP Gateway adapter that this is not a standard call but a Skype call,
you will hear a new dial-tone, press the speed dial number (e.g. 99) and then press the asterisk (*)
key.
5.2.2 Setting Up Skype Speed Dial
This section describes how to setup speed dials in Skype™. This is required in order to
use a Skype VoIP Gateway connected handset to dial to a Skype™ contact. It is not required for
making SkypeOut™ calls using a Skype VoIP Gateway connected handset.
Step 1:
Right click on the desired contact as shown below and select Set Speed-Dial :