42
Assembly Instructions
Loc-Nut
Flat Washer
6-1/2''
Hex Head Bolt
Flat Washer
Quick Link
Wind Rider
x4
x4
x4
Wind Rider
Quick Link
Quick Link
Wind Rider Assembly
1.
Insert Seat into Handle as shown in
(Fig. 31)
. Secure in place with hardware shown.
Note:
Make certain no more than two bolt threads protrude from the Loc-Nut once fully tightened.
2.
Insert (1) Quick Link into the end of each length of chain, as shown in
(Fig. 31a)
. Make certain the Quick Link is
positioned as shown.
3.
Using the Quick Link, attach each length of chain to the (4) corners of your swing as shown in
(Fig. 31b)
. Make
certain Quick Link is positioned as shown.
4.
Close and tighten all four Quick Links with a suitable wrench, as shown in
(Fig. 31c)
.
5.
Attach (2) Chains per Swing Hanger as shown in
(Fig. 31d)
. Be certain to crimp Swing Hangers closed to secure
swing chain in place and prevent possible injury.
Fig. 31
Fig. 31a
Fig. 31b
Fig. 31c
Fig. 31d
